Integrated Protocols

    AUTOMATION PROTOCOLSBACnet Contatto (Duemmegi) Domino (Duemmegi) KNX DALI (Tridonic) DMX (Kissbox and ENNTECC USB)LORAWAN MASTERBUS MODBUS (Client and server) MQTT (Client and broker) MYHOME (Bticino) NIKO NMEA

  • BACnet

    HSYCO can be configured as a BACnet/IP client device. HSYCO conforms to a functional subset of the BACnet protocol, as defined in ANSI/ASHRAE Standard 135-2010.

  • Contatto (Duemmegi)

    The Contatto system is DUEMMEGI’s proprietary bus architecture for building automation. HSYCO fully integrates with this system through the MCP control and gateway module, and its FXP-XT serial communication protocol.

  • Domino (Duemmegi)

    The Domino system is DUEMMEGI’s proprietary bus architecture for home automation. HSYCO fully integrates with this system through the DFCP or DFCP4 control and gateway module, and its FXP-XT serial communication protocol.

  • KNX

    The KNX I/O Server provides for the control of a KNX installation compliant with the KNX Standard version 2.0. The communication between HSYCO and the KNX network must employ a KNXnet/IP gateway supporting the Tunneling service.

  • DALI (Tridonic)

    Tridonic is a lighting system based on the DALI bus technology. HSYCO integrates this system and communicates with it through the DALI SCI2 interface module or DALI interface RS232 PS/S interface module and its communication protocol. The integration relies on a direct connection between the DALI SCI2 or DALI RS232 PS/S interface and HSYCO server’s RS-232 serial port, or through a TCP/IP to serial port gateway.

  • DMX (Kissbox and Enttec USB)

    HSYCO can control any DMX-512 standard bus via Enttec DMX USB PRO (USB) or KISSBOX (TCP/IP)

  • LoRaWAN

    The LoRaWAN I/O Server implements both a LoRaWAN Network and Application servers for the integration of a LoRaWAN network.

  • MasterBus

    MasterBus is a proprietary communication protocol used in a wide range of products from Mastervolt. It can be interfaced via the MasterBus Modbus Interface

  • Modbus (TCP client/server or Modbus RTU master)

    HSYCO supports both Modbus TCP and Modbus RTU, acting as a Modbus master in both cases. HSYCO’s Modbus TCP SERVER I/O Server implements a Modbus TCP/IP server, allowing external Modbus clients to connect to HSYCO and perform any standard Modbus function.

  • MQTT (client and broker)

    HSYCO can act as an MQTT client (publisher/subscriber) or a MQTT broker it fully supports MQTT version 3.1.1.

  • MyHome (BTicino)

    MyHome is a proprietary bus system for home automation developed by BTicino. HSYCO fully integrates with MyHome using the OpenWebNet (OWN) protocol.

  • Niko

    HSYCO acts as an MQTT client (publisher/subscriber) for HSYCO and establishes a connection with Niko Connected Controller in order to control Niko actions associated with lights and dimmers

  • NMEA

    The NMEA I/O Server implements a basic NMEA 0183 TCP client that connects to a NMEA 0183 source and receives all sentences, checking and discarding the checksum of valid messages, and ignoring invalid messages.

ANTI INTRUSION PANELSAritech CSx Bentel Kyo Bosch MAP Dea Xensity Elmo Honeywell Galaxy Guardall QX PX Hesa Quaranta Inim SmartLiving Ksenia Lares Networkx Paradox Evo Hd Protege Satel Integra Tecnoalarm Texecom

  • Aritech CSx

    Aritech CSx75 is a multi-area security system. The integration with HSYCO can be accomplished via direct control through the RS-232 port on its panel.

  • ATS

    Aritech ATS panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the serial module.

  • Bentel Kyo

    The Bentel KYO320 is an advanced, multi-area security system integrated HSYCO. The integration with HSYCO can be accomplished through the standard RS-232 port on the KYO320’s motherboard.

  • Bosch MAP

    The Bosch MAP panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via Ethernet connection.

  • DEA XENSISTY

    DEA XENSISTY is a Point ID intrusion detection system using special piezoelectric sensors for the protection of doors, windows, glass surfaces, security grilles and walls. This driver is compatible with the following controllers: Xensity128, Xensity64, Xensity32. Make sure to install the latest available firmware.

  • EL.MO.

    EL.MO. security panels (STR, Pregio, Vidomo, Proxima and Titania) are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS232 port on the panel. (This driver is also compatible with IESS ETR series)

  • Honeywell Galaxy

    The Honeywell Galaxy Dimension panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via RS-232 serial connection and has been tested with firmware version 6.80.

  • Guardall QX PX

    Guardall QX32i, PX80 and PX500 are multi-area security systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the panel. The I/O Server supports QX32i, PX80 and PX500 Guardall units with software version 4.33

  • Hesa Quaranta

    Hesa Quaranta panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the board.

  • Inim SmartLiving

    Inim SmartLiving panels (515, 1050, 10100) are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the board.

  • KSENIA Lares

    The KSENIA lares 16IP/48IP/128IP are multi-area security systems. The integration with HSYCO can be accomplished via direct control through Ethernet connection. The I/O Server has been tested on units with product revision 1.6.1247, web server firmware version 1.0.0.15 and HTML version 1.1.33 and 1.1.44.

  • NetworX

    NetworX is a multi-area security system. The integration with HSYCO can be accomplished via direct control through their serial or ethernet interfaces.

  • PARADOX EVO48, EVO192, EVOHD

    PARADOX EVO48, EVO192 and EVOHD are advanced, multi-area security systems integrated with a variety of wired and wireless sensors. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the PRT3 Integration Module.

  • Protege

    Protege is a server based architecture enabling you to securely manage, control and monitor a number of users, doors, areas, and other devices. The integration with HSYCO can be accomplished with a TCP/IP network connection.

  • Satel INTEGRA

    The Satel INTEGRA series comprises a variety of multi-area security systems. The integration with HSYCO can be accomplished via direct control through Ethernet connection. The ethernet connection is possibile via the interface ETHM-1 PLUS

  • Tecnoalarm

    The Tecnoalarm TP16-256, TP8-64BUS, TP8-96VIDEO, TP8-96GSM, TP16-512GSM, TP8-88 and TP20-440 are advanced, multi-area security systems integrated with a variety of wired and wireless sensors. The integration with HSYCO can be accomplished with a TCP/IP network connection.

  • Texecom

    The Texecom Premier Elite control panels are advanced, multi-area security systems. The integration with HSYCO can be accomplished via RS-232 serial communication or via Ethernet connection. This I/O Server has been tested with firmware version V3.02.00LS2

    • FIRE PANELSBosch Fpa Fp2000 Hephais - DEF Kilsen - Aritech 2x series Notifier Tecnofire

  • Aritech FP2000

    Aritech Interlogix FP2000 is a multi-area fire panel. The integration with HSYCO can be accomplished via direct control through the RS232 port on the panel.

  • Bosch FPA

    The BOSCH FPA-5000 is a modular fire panel system. The integration with HSYCO can be accomplished via direct control through the RS-232 communication module.

  • KILSEN - Aritech 2x series

    KILSEN KFP-A are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation P/N 00-3243-505-1603-01 • ISS 14DEC15 This driver is also compatible with Aritech 2x series.

  • Notifier

    The Notifier AM-2000, AM-4000 and AM-6000 are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus RTU slave interface via SIB600OEM MODBUS module.

  • SD3 HEPHAIS - DEF

    The SD3 HEPHAIS 1600 is a multi-zones fire panel. The integration with HSYCO can be accomplished via a standard Modbus RTU slave interface. This I/O Server requires HEPHAIS 1600 with protocol modbus JBUS V0.13.

  • Tecnofire

    The Tecnofire TFA1-298,TFA2-569 and TFA4-1192 are advanced, fire detection systems. Panel's firmware version 1.3.17 or above is required. TFNET firmware version 1.2.02 or above is required. The integration with HSYCO is based on a TCP/IP network connection.

    • HVACAirzone Daikin (ITC) Giacomini GiakoClima Mitsubishi VRV (MNET) Raycontrol

  • Airzone

    Airzone is a control framework for ducted air conditioning systems which allows for the control of several zones independently. This I/O server provides support for this Airzone systems: INNOBUS, FLEXA, ANTREE and CEN.

  • Daikin (iTC and iTM)

    Daikin air-conditioning systems in combination with the intelligent Touch Controller (iTC) or the intelligent Touch Manager (iTM) allow for remote control and supervision, via Ethernet communication, of the whole framework. This driver is compatible with iTC and iTM modules respectively compliant with the DCS007A51 and DCM007A51 http protocol.

  • Giacomini GiakoClima

    The GiacoKlima bus system equipped with the KM203 network controller allows for remote control and supervision, via Serial communication, of the whole heating/cooling framework.

  • Mitsubishi VRV (MNET)

    The Mitsubishi I/O Server can control air-conditioning devices connected to a Mitsubishi M-NET bus via a centralized controller and the Ethernet LAN.

  • RayControl

    RayControl 30 is the control unit for the FCC Planterm temperature control system. The integration with HSYCO can be accomplished via a standard Modbus RTU connection.

    • VIDEO ANALISYSArteco Next Avigilon

  • Arteco Next

    The ARTECOOC I/O Server can be used to interface HSYCO and the Arteco Next platform using the Arteco Open Connector SDK protocol.

  • Avigilon

    Avigilon Control Center (ACC) 7 is a video management software that can be integrated in HSYCO with a TCP/IP connection. The current release of the I/O Server has been tested with the Avigilon Control Center 7.6.0.22

    • CAMERASAxis Dahua Foscam Ganz Hikvision Mobotix Samsung Every camera with HTTP MJPG support Every camera with HTTP MJPG support

  • Axis

  • Dahua

  • Foscam

  • Ganz

  • Hikvision

  • Mobotix

  • Samsung

  • Every camera with HTTP MJPG support

    • ACCESS CONTROLHID Iono Pi Wolf

  • HID Edge

    The HID Edge Solo are single-door IP access control solutions. This I/O Server allows the integration of HID Edge Solo devices by using a TCP/IP connection.

  • Iono Pi

    Iono Pi is a versatile I/O module that combines several digital and analog input lines, power relay outputs and support for standard interfaces, typical of modern PLCs, with the powerful computing core of the Raspberry Pi. Iono Pi has a standard Wiegand interface.

  • Wolf

    HSYCO integrates the 8Access system by Wolf Safety through USB or Ethernet connection.

    • MISCELLANEOUSAPC Rack PDU Arduino Arteco I/O Cradlepoint Routers Elsner Meteo Station Epson Projectors GSM modems HWG IO HWG Monitor Philips Hue Sfera Labs Products PowerOne Redscan Sip Voip Veridect Vaisala Weather station

  • APC Rack PDU

    The APC by Schneider Electric Rack Power Distribution Unit (PDU) may be used as a stand-alone, network- manageable power distribution device or up to four devices can be connected together using one network connection. The HSYCO RACKPDU driver supports the AP88XX and AP78XXB Metered models.

  • Arduino

    HSYCO supports Arduino through an open source library installed in the Arduino IDE. This library implements a bidirectional communication protocol with HSYCO. A sketch in Arduino that allows HSYCO to directly read and control any of the digital and analog pins on any Arduino board is only a few lines long, and is provided as a built-in example in the HSYCO library. HSYCO supports Arduino Uno, Arduino Ethernet, Arduino Due and other compatible boards.

  • Arteco Everywhere I/O

    Arteco Everywhere is a general purpose digital input-output Ethernet controller. The integration with HSYCO can be accomplished with a TCP/IP network connection.

  • Cradlepoint Routers

    The Cradlepoint driver for HSYCO allows you to monitor the real-time status of the Cradlepoint IBR6xx series of routers. The integration with HSYCO can be accomplished with a TCP/IP network connection

  • Elsner Meteo Station

    The Elsner P03/3-MODBUS is a solid-state weather station with a standard Modbus RTU slave interface.

  • Epson Projectors

    This I/O Server control SEIKO EPSON projectors which include a wide range of multi-source projectors remotely controllable via Ethernet via ESC/VP21 protocol.

  • GSM modems

    The GSM I/O Server provides services for sending and receiving SMSs and events generation for incoming calls via GSM modem. The integration with HSYCO can be accomplished via direct control through the RS-232 port.

  • HWG I/O

    The HWGIO I/O Server is compatibile with Controller2, PortBox, ER84 and ER88. The integration with HSYCO can be accomplished with a TCP/IP network connection.

  • HWG Monitor

    The HWGMONITOR I/O Server supports the following monitoring devices from HW group: Damocles, Poseidon STE, WLD. The integration with HSYCO can be accomplished with a TCP/IP network connection

  • Philips Hue

    HSYCO integrates the Philips Hue wireless bulbs through their bridge device connected to the local network.

  • Sfera Labs Servers, I/O Modules and Sensors

    Sfera Labs products can be integrated with dedicated I/O servers or via Modbus RTU.

  • Power-One

    The Aurora/ABB Power-One inverters allow for remote supervision of the system providing with several measurement data. The integration with HSYCO can be accomplished with a serial RS485 - TCP/IP gateway.

  • REDSCAN

    The Optex REDSCAN is a laser scan detector that can detect a moving object's size, speed, and distance with high-reliability. The integration with HSYCO can be accomplished via direct control through Ethernet connection. The I/O Server complies with the Optex REDSCAN Protocol v1.71 and has been tested on firmware version 7.3.0.

  • Sip VoIP

    The HSYCO SIP I/O Server allows HSYCO to control standard VoIP client software (also called soft-phones), in order to integrate telephony features in HSYCO applications. The SIP I/O Server also works as a basic IVR (interactive voice response) system, allowing HSYCO to interact with users via the standard telephony system through the use of voice and DTMF tones input on the phone’s keypad.

  • VE.Direct

    VE.Direct is a simple, proprietary, communication protocol used in Victron Energy BlueSolar MPPT Charge 70/15 and the BMV-700 series battery monitors. Connect the VE.Direct port to HSYCO using the Victron Energy "VE.Direct to USB" interface cable.

  • Vaisala Weather station

    The Vaisala WXT520 is a small and lightweight transmitter that offers six weather parameters in one compact package. The HSYCO WXT520 driver supports the RS-232 and RS-485 serial interface version, with the ASCII automatic protocol on the WXT520.

    • AUDIO VIDEOAton Denon Heos Nuvo Sonos Vivaldi Freenet Wyrestorm Matrix Yamaha Rx Yamaha EC

  • Aton

    Aton AH66T is a multi-zone audio system. The integration with HSYCO can be accomplished via direct control through the RS232 port on the module.

  • Denon Heos

    Heos by Denon comprises a set of HiFi audio systems integrated with HSYCO via WiFi or Ethernet connection. A single HEOS I/O Server controls all the devices connected to the local network. The driver has been tested on firmware version 1.289.95 of the HEOS devices.

  • Nuvo

    NuVo Grand Concerto and Essentia E6G are multi-source, multi-zone audio distribution systems that may be integrated to work with external control systems and servers. The integration with HSYCO can be accomplished via direct control through the RS232 port.

  • Sonos

    Sonos comprises a set of HiFi audio systems integrated with HSYCO via WiFi or Ethernet connection. A single SONOS I/O Server controls all the devices connected to the local network.

  • Vivaldi Freenet

    The Vivaldi Giove FREENETMK2 is an in-wall stand alone amplifier for multiroom audio applications, in a 503-3 modules standard case, and RS-485 control port.

  • Wyrestorm Matrix

    The Wyrestorm MX-0808-PP, MX-0606-PP and MX-0404-PP modules are matrix switchers that allow any of their HDMI inputs to be routed over distance to any combination of their display outputs via a single UTP cable. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the module.

  • Yamaha Rx

    The Yamaha RX series is a collection of multi-source, multi-zone AV receiver/amplifier that can be integrated to work with external control systems and servers via ethernet connection. This I/O server has been tested on the following models: RX-V1067, RX-V2067, RX-V3067, RX-V777 and RXA-2030 SINTO DSP. It should be compatible as well with the following models: RX-A740, RX-A840, RX-A1040, RX-A2040, RX-A3040, RX-V677, RX-V1077, RX-V2077 and RX-V3077.

  • Yamaha EC

    YamahaEc is TCP/IP protocol compatibile with various Yamaha amplifiers.

    • SERVICESGoogle Calendar IFTTT WXOnline SMTP SSH Telegram

  • Google Calendar

    This driver allows for the use of Google Calendar as a scheduler.

  • IFTTT

    This I/O Server implements two-way communication with the Webhooks service of IFTTT, allowing HSYCO to trigger applets in IFTTT and, the other way around, to receive notifications and data from applets.

  • WXOnline

    This driver provides weather information and forecasts retrieved from OpenWeatherMap.

  • SMTP

    The SMTPSERVER I/O Server implements a very basic Simple Mail Transfer Protocol (SMTP) server based on a subset of the RFC 821 standard.

  • SSH

    The SSH I/O Server implements the SSH-2 version of the protocol, and supports remote command execution and the SCP protocol for bidirectional file transfer. It uses HSYCO data points to execute commands and return command status, making it easy to use the SSH protocol in EVENTS, as well as JavaScript and Java.

  • Telegram

    This I/O Server allows you to implement a custom Telegram bot in HSYCO, for sending and receiving messages using the Telegram messaging service.