Search
Close this search box.

Products and Solutions

HSYCO Iono Pi – TEST BUILD

845.001,399.00 + tax

HSYCO Iono Pi is an extremely versatile server based on the Raspberry Pi’s powerful computing core that combines the HSYCO engine with many digital and analog input lines, power relay outputs, and offers support for standard interfaces, such as Wiegand or 1-Wire. HSYCO Iono Pi is the perfect choice wherever is necessary to read field sensors quickly and efficiently through an integrated graphical interface, completely customizable.

HSYCO Iono Pi is an extremely versatile server based on the Raspberry Pi’s powerful computing core that combines the HSYCO engine with many digital and analog input lines, power relay outputs, and offers support for standard interfaces, such as Wiegand or 1-Wire.

HSYCO Iono Pi is the perfect choice wherever is necessary to read field sensors quickly and efficiently through an integrated graphical interface, completely customizable. Thanks to the wide list of supported protocol, HSYCO Iono Pi Max is the ideal solution for the supervision of KNX,  Modbus, BACnet, DALI and, more generally, for any of our supported devices and services. It could be used in access control applications, as well, thanks to the Wiegand support.

No datapoints limitations, unlimited clients.

Hardware Specs:

Industrial Raspberry Pi I/O module (PLC), CE/FCC/IC compliant, with wide-range power supply, RTC, digital and analog inputs, power relays, open collector outputs and TTL I/O lines for 1-wire, Wiegand and other digital protocols.

  • Raspberry Pi Model 3B+, 4B 2G/4G/8G
  • 4 GB SLC ?SD
  • 1 Ethernet
  • 4 USB
  • Analog inputs (0-30V)
  • Digital inputs and outputs
  • 4 relays output
  • 1-Wire and Wiegand support
  • Secure Element Chip
  • Power supply 9-28Vcc

Specifications

Power supply (VS) 9-28V⎓ (VDC) Reverse polarity protection with 2.2A resettable fuse. Surge protection up to ±1000V/2ohms 1.2/50μs
Current consumption at VS+ 12V⎓ including Raspberry Pi 4, with Ethernet connected, no USB devices low CPU load: 320mA, 100% CPU load, before throttling: 590mA 100% CPU load, throttled: 500mA All relays ON add 90mA Actual current consumption may vary based on working conditions
Current consumption at VS+ 24V⎓ including Raspberry Pi 4, with Ethernet connected, no USB devices low CPU load: 190mA, 100% CPU load, before throttling: 320mA 100% CPU load, throttled: 280mA All relays ON add 50mA Actual current consumption may vary based on working conditions
Raspberry platform compatibility Pi 4 Model B Pi 3 Model B+ Pi 3 Model B Pi 2 Model B (tested with Pi 4 Model B for regulatory compliance)
Voltage range at digital inputs DI1..DI3: 0÷40V ⎓ in normal mode; 0÷5V ⎓ in TTL mode DI4..DI6: 0÷VS+ ⎓
Current for each digital input in normal mode DI1..DI3:

  • 1.7mA at VS+=12V ⎓
  • 3.4mA at VS+=24V ⎓

DI4..DI6:

  • 1.9mA at VS+=12V ⎓
  • 3.9mA at VS+=24V ⎓
Voltage threshold digital inputs in normal mode
  • VIH: 4.2V
  • VIL: 3.4V
Voltage threshold digital inputs in TTL mode
  • VIH: 2.4 V
  • VIL: 0.8 V
Range for analog inputs
  • AI1..AI2: 0÷30V ⎓
  • AI3..AI4: 0÷3V ⎓
Impedance for analog inputs AI1..AI4: 200kOhm
Analog inputs characteristics
  • Resolution: 12 bits
  • Linearity: ±1LSB
  • MAX error: ±2% of full scale
Maximum recommended cable length for digital inputs
  • normal mode: 30m
  • TTL mode: 2m
Maximum recommended cable length for analog inputs 1-2 15m
Maximum recommended cable length for open collector outputs 2m
Relay outputs rating
  • Rated current: 6 A
  • Rated voltage: 250 V AC
  • Rated load (AC1, resistive load): 1500 VA
  • Rated load (AC15, cos φ = 0.5): 250 VA
  • Single phase motor rating (230 V AC): 185 W
  • Breaking capacity (DC1):
    • 3 A at 30 V DC
    • 0.35 A at 110 V DC
    • 0.2 A at 220 V DC
  • Electrical life at rated load AC1: 50000 cycles
  • Mechanical life: 20000000 cycles
  • Operate/release time: 6/4 ms
  • Dielectric strength between open contacts: 1000 V AC
  • Type of insulation between coil and contacts: Basic
  • Dielectric strength between coil and contacts: 4000 V AC
Open collector outputs rating NPN type, shared with DI4..DI6, common on VSOUT, short circuit protected 100mA MAX output current
AUX VSOUT
  • Max allowable current: 300mA
  • Min voltage: Supply voltage – 1V
AUX 5VOUT
  • Max allowable current: 50mA
  • Min voltage: 4.5V
Real time clock Internal RTCC circuit with backup lithium battery. Only use CR1025 Lithium / Manganese Dioxide (Li/MnO2) batteries. Expected battery life without main power supply: ~2 years
15-pin terminal block characteristics Maximum conductor cross section: 1.5 mm2 (16 AWG), or 0.5 mm2 when using ferrules (highly recommended) Recommended stripping length: 5 mm Screw thread: M2 Maximum screws tightening torque: 0.25 Nm
8-pin terminal block characteristics Maximum conductor cross section: 2.5 mm2 (12 AWG) Recommended stripping length: 7 mm Screw thread: M3 Maximum screws tightening torque: 0.6 Nm
Electromagnetic immunity compliance EN 61000-4-2 (ESD) EN 61000-4-3 (Radiated RF Field) EN 61000-4-4 (Burst/fast transient) EN 61000-4-5 (Surge) EN 61000-4-6 (Conducted) EN 61000-4-8 (Power frequency magnetic field)
Housing standard 4M for DIN rail
Operating temperature -20…+50 °C with SPBF10X: -20…+65 °C
Storage temperature -30…+70 °C
Relative humidity 5% to 90% noncondensing
Protection degree IP20
Weight 190 g

STAY UPDATED

Be the first to know about  the latest news and announcements from HSYCO

Quote Request

Request for: HSYCO Iono Pi – TEST BUILD

    Billing Address

    Ship to a different address

    Shipping Address

    Quantity

    Custom packaging/case branding