HSYCO Iono Pi is an extremely versatile server based on the Raspberry Pi’s powerful computing core that combines the HSYCO engine with many digital and analog input lines, power relay outputs, and offers support for standard interfaces, such as Wiegand or 1-Wire. HSYCO Iono Pi is the perfect choice wherever is necessary to read field sensors quickly and efficiently through an integrated graphical interface, completely customizable.
HSYCO Iono Pi is an extremely versatile server based on the Raspberry Pi’s powerful computing core that combines the HSYCO engine with many digital and analog input lines, power relay outputs, and offers support for standard interfaces, such as Wiegand or 1-Wire.
HSYCO Iono Pi is the perfect choice wherever is necessary to read field sensors quickly and efficiently through an integrated graphical interface, completely customizable. Thanks to the wide list of supported protocol, HSYCO Iono Pi Max is the ideal solution for the supervision of KNX, Modbus, BACnet, DALI and, more generally, for any of our supported devices and services. It could be used in access control applications, as well, thanks to the Wiegand support.
No datapoints limitations, unlimited clients.
Hardware Specs:
Industrial Raspberry Pi I/O module (PLC), CE/FCC/IC compliant, with wide-range power supply, RTC, digital and analog inputs, power relays, open collector outputs and TTL I/O lines for 1-wire, Wiegand and other digital protocols.
Power supply (VS) | 9-28V⎓ (VDC) Reverse polarity protection with 2.2A resettable fuse. Surge protection up to ±1000V/2ohms 1.2/50μs |
Current consumption at VS+ 12V⎓ including Raspberry Pi 4, with Ethernet connected, no USB devices | low CPU load: 320mA, 100% CPU load, before throttling: 590mA 100% CPU load, throttled: 500mA All relays ON add 90mA Actual current consumption may vary based on working conditions |
Current consumption at VS+ 24V⎓ including Raspberry Pi 4, with Ethernet connected, no USB devices | low CPU load: 190mA, 100% CPU load, before throttling: 320mA 100% CPU load, throttled: 280mA All relays ON add 50mA Actual current consumption may vary based on working conditions |
Raspberry platform compatibility | Pi 4 Model B Pi 3 Model B+ Pi 3 Model B Pi 2 Model B (tested with Pi 4 Model B for regulatory compliance) |
Voltage range at digital inputs | DI1..DI3: 0÷40V ⎓ in normal mode; 0÷5V ⎓ in TTL mode DI4..DI6: 0÷VS+ ⎓ |
Current for each digital input in normal mode | DI1..DI3:
DI4..DI6:
|
Voltage threshold digital inputs in normal mode |
|
Voltage threshold digital inputs in TTL mode |
|
Range for analog inputs |
|
Impedance for analog inputs | AI1..AI4: 200kOhm |
Analog inputs characteristics |
|
Maximum recommended cable length for digital inputs |
|
Maximum recommended cable length for analog inputs 1-2 | 15m |
Maximum recommended cable length for open collector outputs | 2m |
Relay outputs rating |
|
Open collector outputs rating | NPN type, shared with DI4..DI6, common on VSOUT, short circuit protected 100mA MAX output current |
AUX VSOUT |
|
AUX 5VOUT |
|
Real time clock | Internal RTCC circuit with backup lithium battery. Only use CR1025 Lithium / Manganese Dioxide (Li/MnO2) batteries. Expected battery life without main power supply: ~2 years |
15-pin terminal block characteristics | Maximum conductor cross section: 1.5 mm2 (16 AWG), or 0.5 mm2 when using ferrules (highly recommended) Recommended stripping length: 5 mm Screw thread: M2 Maximum screws tightening torque: 0.25 Nm |
8-pin terminal block characteristics | Maximum conductor cross section: 2.5 mm2 (12 AWG) Recommended stripping length: 7 mm Screw thread: M3 Maximum screws tightening torque: 0.6 Nm |
Electromagnetic immunity compliance | EN 61000-4-2 (ESD) EN 61000-4-3 (Radiated RF Field) EN 61000-4-4 (Burst/fast transient) EN 61000-4-5 (Surge) EN 61000-4-6 (Conducted) EN 61000-4-8 (Power frequency magnetic field) |
Housing | standard 4M for DIN rail |
Operating temperature | -20…+50 °C with SPBF10X: -20…+65 °C |
Storage temperature | -30…+70 °C |
Relative humidity | 5% to 90% noncondensing |
Protection degree | IP20 |
Weight | 190 g |
© 2023 HSYCO | All rights reserved
Privacy Policy | Cookie Policy | Terms & Conditions
Be the first to know about the latest news and announcements from HSYCO